Table top: MDF; in soft light powder-coated (textured), basic dark powder-coated (textured), chocolate powder-coated, deep black powder-coated (textured)
Base: powder coated (smooth); deep black powder coated.
Table top: Melamine top in soft light with ABS edge, table thickness 25 mm; with real wood edge, table thickness 25 mm. Other wood veneers available upon request; Powder-coated MDF top in soft white with 15 mm chamfered edge, table thickness 25 mm.
Description: laminated particle board with block core coated with melamine resin according to DIN EN 14322.
Table thickness: thickness of finished table top approx. 19 mm.
Edge: black ABS edge (3 mm).
Safety: all edges and corners are rounded. Environmental safety: meets (or exceeds) E1 category standards for environmentally safe emissions.
Note: threaded sleeves are screwed into the underside of the table top to facilitate the variable arrangement of the leg adaptors. Table tops are available in the colours soft light and dim grey.
Table tops available in three materials: melamine faced, white surface, smooth straight plastic edge (19 mm); light or dark oak veneer (Europe) (19 mm); solid core laminate in the colours white, pastel grey or black with black edge (12 mm). The solid core table top in black has an additional anti-fingerprint coating.
Base: powder-coated in basic dark (RAL 9004). The height of the base including screw-in glides is 1080 mm; the glides can be adjusted (max. extension 10 mm) for levelling on uneven floors.
Applications: table with top in solid core laminate is also suited for outdoor use. Pre-galvanised base.
Table tops available in three materials: melamine faced, white surface, smooth straight plastic edge (19 mm); light or dark oak veneer (Europe) (19 mm); solid core laminate in the colours white, pastel grey or black with black edge (12 mm). The solid core table top in black has an additional anti-fingerprint coating.
Base: powder-coated in basic dark (RAL 9004). The height of the base including screw-in glides is 715 mm; the glides can be adjusted (max. extension 10 mm) for levelling on uneven floors.
Applications: table with top in solid core laminate is also suited for outdoor use. Pre-galvanised base.
Table top: melamine faced in white with smooth straight plastic edge (19 mm), oak veneer (Europe) in natural or dark oak (19 mm) or solid core material with black edge (12 mm) in the colours white or black. Solid core table top in black with anti-fingerprint coating.
Table tops: available in four materials: melamine faced white surface (25 mm) with smooth straight plastic edge in white; light or dark oak veneer (Europe) (25 mm) with straight veneer edge; solid core laminate in white (12 mm) with black edge; HPL (25 mm) with black edge.
Base: stable pedestal base, four-star legs in die-cast aluminium. Available in four versions: base polished or chrome-plated with column in basic dark (RAL 9004), all chrome or all powder-coated (textured finish) in deep black (RAL 9005) or white (RAL 9010). The height of the base including screw-in glides is 71 cm; the glides can be adjusted (max. extension 10 mm) for levelling on uneven floors.
Applications: the powder-coated base can be paired with a solid core table top for outdoor use.
Table top: oak veneer in natural or dark oak (20 mm); melamine faced in white with smooth straight plastic edge (19 mm); or solid core material with black edge (12 mm) in the colours white or black. Solid core table top in black with anti-fingerprint coating.
Base: powder-coated with finely textured finish in deep black (RAL 9005). The height of the base including screw-in glides is 720 mm; the glides can be adjusted (max. extension 10 mm) for levelling on uneven floors.
Applications: table with top in solid core material and powder-coated base is suited for outdoor use. The powder-coated bases are pre-galvanised.
Table top: oak veneer in natural or dark oak (20 mm); melamine faced in white with smooth straight plastic edge (19 mm); or solid core material with black edge (12 mm) in the colours white or black. Solid core table top in black with anti-fingerprint coating.
Base: powder-coated with finely textured finish in deep black (RAL 9005). The height of the base including screw-in glides is 720 mm; the glides can be adjusted (max. extension 10 mm) for levelling on uneven floors.
Applications: table with top in solid core material and powder-coated base is suited for outdoor use. The powder-coated bases are pre-galvanised.
Table top: HPL high-pressure laminate surface (25 mm) with black edge; or oak veneer, light or dark (25 mm), with flat veneer edge.
Base: components for segmented base include legs, spreader connectors, spreaders, columns and spiders. Legs and spreader connectors made of die-cast aluminium, polished, chrome finish or powder-coated; columns and spreaders made of steel, chrome-plated or powder-coated; spiders made of die-cast aluminium, powder-coated.
Table top: 25 mm thick, solid wood with oiled finish, natural oak, smoked oak or American walnut; or HPL (high-pressure laminate) surface with black edges.
Base: components for segmented base include legs, spreader connectors, spreaders, columns and spiders. Legs polished or chrome-plated with column in basic dark (RAL 9004), all chrome or all powder-coated (textured finish) in deep black (RAL 9005).
Origin of wood: oak (Quercus robur) from Western Europe and/or Poland; American walnut (Juglans nigra) from the USA.
Pleasantly soft upholstery and side and back panels that can be adjusted to an outward angle of approximately 30° give the Mariposa Sofa (2014) by Edward Barber and Jay Osgerby
Backrest and seat: flexible upper backrest shell. Seat and backrest shell in fibreglass-reinforced polyamide. Seat and backrest upholstery in polyurethane foam. Armrests are integrated in the seat shell. With two seams along the sides of the backrest.
Five-star base: powder-coated (basic dark) or polished aluminium.
Seat: non-swivel. Sewn-on cushion with polyurethane foam upholstery in Leather or Premium Leather (latter version with topstitching). Side profiles and spreaders in die-cast aluminium, with a polished or chrome-plated finish or powder-coated in deep black.
Base: four-star base in die-cast aluminium, with a polished or chrome-plated finish or powder-coated in deep black.
Legs: die-cast aluminium, polished or powder-coated.
Body: webbed metal frame with moulded polyurethane foam. Classic seat cushions, firm: polyurethane foam and polyester fibre. Classic seat cushions, soft and tufted: polyurethane foam core and chamber cushion overlay (filled with polyurethane foam lozenges, latex and a mix of goose feathers and down).
Seat height: 430 mm (315 mm with applied load, measured in accordance with EN 1335-1). Classic back cushions, firm: chamber cushions filled with polyurethane chips and feathers. Classic back cushions, soft: chamber cushions filled with polyurethane foam cubes and feathers. Tufted back cushions: chamber cushions filled with polyurethane foam cubes and ball fibres. Pointed cushions 40 x 40 cm and 40 x 60 cm: filled with 100% feathers. Pointed cushions 60 x 60 cm and 60 x 80 cm: filled with polyurethane foam lozenges and feathers.
Bolsters: filled with polyurethane foam lozenges and feathers.
Armrest cushions: latex and siliconised fibres.
Covers: removable.
Glides: non-slip.
Head section: moulded polyurethane foam with metal frame.
Shelf: aluminium profile, powder-coated die-cast zinc with linoleum inlay.
Daybed: metal frame with wooden panel, polyurethane foam, soft seat cushion.
Ottoman, soft and tufted: wooden panel, polyurethane foam core and chamber cushion overlay (filled with polyurethane foam lozenges, latex and a mix of goose feathers and down).
Covers: removable.
Glides: glides for carpet or felt glides for hard floors.
Note: the designations 'left' and 'right' refer to the perspective when viewing the sofa from the front.
Note: ripples and indentations from sitting (pressure marks) and partially visible outlines of the chamber cushions are characteristic of high-quality, soft upholstery in combination with a removable cover and can be more or less pronounced, depending on the selected cover material. To retain the fullness and shape of your sofa, cushions should be regularly shaken and plumped. Applications: soft upholstery recommended for domestic use only.
Body: moulded polyurethane foam with webbed metal frame. Seat cushion: polyurethane foam and polyester fibre. Seat height: 430 mm (applied load 355 mm, measured in accordance with EN 1335-1). Legs: die-cast aluminium, polished or powder-coated.
Legs: die-cast aluminium, polished or powder-coated.
Body: webbed metal frame with moulded polyurethane foam. Classic seat cushions, firm: polyurethane foam and polyester fibre. Classic seat cushions, soft and tufted: polyurethane foam core and chamber cushion overlay (filled with polyurethane foam lozenges, latex and a mix of goose feathers and down).
Seat height: 430 mm (315 mm with applied load, measured in accordance with EN 1335-1). Classic back cushions, firm: chamber cushions filled with polyurethane chips and feathers. Classic back cushions, soft: chamber cushions filled with polyurethane foam cubes and feathers. Tufted back cushions: chamber cushions filled with polyurethane foam cubes and ball fibres. Pointed cushions 40 x 40 cm and 40 x 60 cm: filled with 100% feathers. Pointed cushions 60 x 60 cm and 60 x 80 cm: filled with polyurethane foam lozenges and feathers.
Bolsters: filled with polyurethane foam lozenges and feathers.
Armrest cushions: latex and siliconised fibres.
Covers: removable.
Glides: non-slip.
Head section: moulded polyurethane foam with metal frame.
Shelf: aluminium profile, powder-coated die-cast zinc with linoleum inlay.
Daybed: metal frame with wooden panel, polyurethane foam, soft seat cushion.
Ottoman, soft and tufted: wooden panel, polyurethane foam core and chamber cushion overlay (filled with polyurethane foam lozenges, latex and a mix of goose feathers and down).
Covers: removable.
Glides: glides for carpet or felt glides for hard floors.
Note: the designations 'left' and 'right' refer to the perspective when viewing the sofa from the front.
Note: ripples and indentations from sitting (pressure marks) and partially visible outlines of the chamber cushions are characteristic of high-quality, soft upholstery in combination with a removable cover and can be more or less pronounced, depending on the selected cover material. To retain the fullness and shape of your sofa, cushions should be regularly shaken and plumped. Applications: soft upholstery recommended for domestic use only.
Body: moulded polyurethane foam with webbed metal frame. Seat cushion: polyurethane foam and polyester fibre. Seat height: 430 mm (applied load 355 mm, measured in accordance with EN 1335-1). Legs: die-cast aluminium, polished or powder-coated.
Legs: die-cast aluminium, polished or powder-coated.
Body: webbed metal frame with moulded polyurethane foam.
Classic seat cushions, firm: polyurethane foam and polyester fibre.
Classic seat cushions, soft and tufted: polyurethane foam core and chamber cushion overlay (filled with polyurethane foam lozenges, latex and a mix of goose feathers and down).
Seat height: 430 mm (315 mm with applied load, measured in accordance with EN 1335-1).
Classic back cushions, firm: chamber cushions filled with polyurethane chips and feathers.
Classic back cushions, soft: chamber cushions filled with polyurethane foam cubes and feathers.
Tufted back cushions: chamber cushions filled with polyurethane foam cubes and ball fibres.
Pointed cushions 40 x 40 cm and 40 x 60 cm: filled with 100% feathers.
Pointed cushions 60 x 60 cm and 60 x 80 cm: filled with polyurethane foam lozenges and feathers.
Bolsters: filled with polyurethane foam lozenges and feathers.
Armrest cushions: latex and siliconised fibres.
Covers: removable.
Glides: non-slip.
Head section: moulded polyurethane foam with metal frame.
Shelf: aluminium profile, powder-coated die-cast zinc with linoleum inlay.
Daybed: metal frame with wooden panel, polyurethane foam, soft seat cushion.
Ottoman, soft and tufted: wooden panel, polyurethane foam core and chamber cushion overlay (filled with polyurethane foam lozenges, latex and a mix of goose feathers and down).
Covers: removable.
Glides: glides for carpet or felt glides for hard floors.
Note: the designations 'left' and 'right' refer to the perspective when viewing the sofa from the front.
Note: ripples and indentations from sitting (pressure marks) and partially visible outlines of the chamber cushions are characteristic of high-quality, soft upholstery in combination with a removable cover and can be more or less pronounced, depending on the selected cover material. To retain the fullness and shape of your sofa, cushions should be regularly shaken and plumped.
Applications: soft upholstery recommended for domestic use only.
Legs: die-cast aluminium, polished or powder-coated.
Body: webbed metal frame with moulded polyurethane foam.
Classic seat cushions, firm: polyurethane foam and polyester fibre.
Classic seat cushions, soft and tufted: polyurethane foam core and chamber cushion overlay (filled with polyurethane foam lozenges, latex and a mix of goose feathers and down).
Seat height: 430 mm (315 mm with applied load, measured in accordance with EN 1335-1).
Classic back cushions, firm: chamber cushions filled with polyurethane chips and feathers.
Classic back cushions, soft: chamber cushions filled with polyurethane foam cubes and feathers.
Tufted back cushions: chamber cushions filled with polyurethane foam cubes and ball fibres.
Pointed cushions 40 x 40 cm and 40 x 60 cm: filled with 100% feathers.
Pointed cushions 60 x 60 cm and 60 x 80 cm: filled with polyurethane foam lozenges and feathers.
Bolsters: filled with polyurethane foam lozenges and feathers.
Armrest cushions: latex and siliconised fibres.
Covers: removable.
Glides: non-slip.
Head section: moulded polyurethane foam with metal frame.
Shelf: aluminium profile, powder-coated die-cast zinc with linoleum inlay.
Daybed: metal frame with wooden panel, polyurethane foam, soft seat cushion.
Ottoman, soft and tufted: wooden panel, polyurethane foam core and chamber cushion overlay (filled with polyurethane foam lozenges, latex and a mix of goose feathers and down).
Covers: removable.
Glides: glides for carpet or felt glides for hard floors.
Note: the designations 'left' and 'right' refer to the perspective when viewing the sofa from the front.
Note: ripples and indentations from sitting (pressure marks) and partially visible outlines of the chamber cushions are characteristic of high-quality, soft upholstery in combination with a removable cover and can be more or less pronounced, depending on the selected cover material. To retain the fullness and shape of your sofa, cushions should be regularly shaken and plumped.
Applications: soft upholstery recommended for domestic use only.
Legs: die-cast aluminium, polished or powder-coated.
Body: webbed metal frame with moulded polyurethane foam. Classic seat cushions, firm: polyurethane foam and polyester fibre. Classic seat cushions, soft and tufted: polyurethane foam core and chamber cushion overlay (filled with polyurethane foam lozenges, latex and a mix of goose feathers and down).
Seat height: 430 mm (315 mm with applied load, measured in accordance with EN 1335-1). Classic back cushions, firm: chamber cushions filled with polyurethane chips and feathers. Classic back cushions, soft: chamber cushions filled with polyurethane foam cubes and feathers. Tufted back cushions: chamber cushions filled with polyurethane foam cubes and ball fibres. Pointed cushions 40 x 40 cm and 40 x 60 cm: filled with 100% feathers. Pointed cushions 60 x 60 cm and 60 x 80 cm: filled with polyurethane foam lozenges and feathers.
Bolsters: filled with polyurethane foam lozenges and feathers.
Armrest cushions: latex and siliconised fibres.
Covers: removable.
Glides: non-slip.
Head section: moulded polyurethane foam with metal frame.
Shelf: aluminium profile, powder-coated die-cast zinc with linoleum inlay.
Daybed: metal frame with wooden panel, polyurethane foam, soft seat cushion.
Ottoman, soft and tufted: wooden panel, polyurethane foam core and chamber cushion overlay (filled with polyurethane foam lozenges, latex and a mix of goose feathers and down).
Covers: removable.
Glides: glides for carpet or felt glides for hard floors.
Note: the designations 'left' and 'right' refer to the perspective when viewing the sofa from the front.
Note: ripples and indentations from sitting (pressure marks) and partially visible outlines of the chamber cushions are characteristic of high-quality, soft upholstery in combination with a removable cover and can be more or less pronounced, depending on the selected cover material. To retain the fullness and shape of your sofa, cushions should be regularly shaken and plumped. Applications: soft upholstery recommended for domestic use only.
Body: moulded polyurethane foam with webbed metal frame. Seat cushion: polyurethane foam and polyester fibre. Seat height: 430 mm (applied load 355 mm, measured in accordance with EN 1335-1). Legs: die-cast aluminium, polished or powder-coated.
Legs: die-cast aluminium, polished or powder-coated.
Body: webbed metal frame with moulded polyurethane foam. Classic seat cushions, firm: polyurethane foam and polyester fibre. Classic seat cushions, soft and tufted: polyurethane foam core and chamber cushion overlay (filled with polyurethane foam lozenges, latex and a mix of goose feathers and down).
Seat height: 430 mm (315 mm with applied load, measured in accordance with EN 1335-1). Classic back cushions, firm: chamber cushions filled with polyurethane chips and feathers. Classic back cushions, soft: chamber cushions filled with polyurethane foam cubes and feathers. Tufted back cushions: chamber cushions filled with polyurethane foam cubes and ball fibres. Pointed cushions 40 x 40 cm and 40 x 60 cm: filled with 100% feathers. Pointed cushions 60 x 60 cm and 60 x 80 cm: filled with polyurethane foam lozenges and feathers.
Bolsters: filled with polyurethane foam lozenges and feathers.
Armrest cushions: latex and siliconised fibres.
Covers: removable.
Glides: non-slip.
Head section: moulded polyurethane foam with metal frame.
Shelf: aluminium profile, powder-coated die-cast zinc with linoleum inlay.
Daybed: metal frame with wooden panel, polyurethane foam, soft seat cushion.
Ottoman, soft and tufted: wooden panel, polyurethane foam core and chamber cushion overlay (filled with polyurethane foam lozenges, latex and a mix of goose feathers and down).
Covers: removable.
Glides: glides for carpet or felt glides for hard floors.
Note: the designations 'left' and 'right' refer to the perspective when viewing the sofa from the front.
Note: ripples and indentations from sitting (pressure marks) and partially visible outlines of the chamber cushions are characteristic of high-quality, soft upholstery in combination with a removable cover and can be more or less pronounced, depending on the selected cover material. To retain the fullness and shape of your sofa, cushions should be regularly shaken and plumped. Applications: soft upholstery recommended for domestic use only.
Body: moulded polyurethane foam with webbed metal frame. Seat cushion: polyurethane foam and polyester fibre. Seat height: 430 mm (applied load 355 mm, measured in accordance with EN 1335-1). Legs: die-cast aluminium, polished or powder-coated.
Legs: die-cast aluminium, polished or powder-coated.
Body: webbed metal frame with moulded polyurethane foam. Classic seat cushions, firm: polyurethane foam and polyester fibre. Classic seat cushions, soft and tufted: polyurethane foam core and chamber cushion overlay (filled with polyurethane foam lozenges, latex and a mix of goose feathers and down).
Seat height: 430 mm (315 mm with applied load, measured in accordance with EN 1335-1). Classic back cushions, firm: chamber cushions filled with polyurethane chips and feathers. Classic back cushions, soft: chamber cushions filled with polyurethane foam cubes and feathers. Tufted back cushions: chamber cushions filled with polyurethane foam cubes and ball fibres. Pointed cushions 40 x 40 cm and 40 x 60 cm: filled with 100% feathers. Pointed cushions 60 x 60 cm and 60 x 80 cm: filled with polyurethane foam lozenges and feathers.
Bolsters: filled with polyurethane foam lozenges and feathers.
Armrest cushions: latex and siliconised fibres.
Covers: removable.
Glides: non-slip.
Head section: moulded polyurethane foam with metal frame.
Shelf: aluminium profile, powder-coated die-cast zinc with linoleum inlay.
Daybed: metal frame with wooden panel, polyurethane foam, soft seat cushion.
Ottoman, soft and tufted: wooden panel, polyurethane foam core and chamber cushion overlay (filled with polyurethane foam lozenges, latex and a mix of goose feathers and down).
Covers: removable.
Glides: glides for carpet or felt glides for hard floors.
Note: the designations 'left' and 'right' refer to the perspective when viewing the sofa from the front.
Note: ripples and indentations from sitting (pressure marks) and partially visible outlines of the chamber cushions are characteristic of high-quality, soft upholstery in combination with a removable cover and can be more or less pronounced, depending on the selected cover material. To retain the fullness and shape of your sofa, cushions should be regularly shaken and plumped. Applications: soft upholstery recommended for domestic use only.
Body: moulded polyurethane foam with webbed metal frame. Seat cushion: polyurethane foam and polyester fibre. Seat height: 430 mm (applied load 355 mm, measured in accordance with EN 1335-1). Legs: die-cast aluminium, polished or powder-coated.
Legs: die-cast aluminium, polished or powder-coated.
Body: webbed metal frame with moulded polyurethane foam. Classic seat cushions, firm: polyurethane foam and polyester fibre. Classic seat cushions, soft and tufted: polyurethane foam core and chamber cushion overlay (filled with polyurethane foam lozenges, latex and a mix of goose feathers and down).
Seat height: 430 mm (315 mm with applied load, measured in accordance with EN 1335-1). Classic back cushions, firm: chamber cushions filled with polyurethane chips and feathers. Classic back cushions, soft: chamber cushions filled with polyurethane foam cubes and feathers. Tufted back cushions: chamber cushions filled with polyurethane foam cubes and ball fibres. Pointed cushions 40 x 40 cm and 40 x 60 cm: filled with 100% feathers. Pointed cushions 60 x 60 cm and 60 x 80 cm: filled with polyurethane foam lozenges and feathers.
Bolsters: filled with polyurethane foam lozenges and feathers.
Armrest cushions: latex and siliconised fibres.
Covers: removable.
Glides: non-slip.
Head section: moulded polyurethane foam with metal frame.
Shelf: aluminium profile, powder-coated die-cast zinc with linoleum inlay.
Daybed: metal frame with wooden panel, polyurethane foam, soft seat cushion.
Ottoman, soft and tufted: wooden panel, polyurethane foam core and chamber cushion overlay (filled with polyurethane foam lozenges, latex and a mix of goose feathers and down).
Covers: removable.
Glides: glides for carpet or felt glides for hard floors.
Note: the designations 'left' and 'right' refer to the perspective when viewing the sofa from the front.
Note: ripples and indentations from sitting (pressure marks) and partially visible outlines of the chamber cushions are characteristic of high-quality, soft upholstery in combination with a removable cover and can be more or less pronounced, depending on the selected cover material. To retain the fullness and shape of your sofa, cushions should be regularly shaken and plumped. Applications: soft upholstery recommended for domestic use only.
Body: moulded polyurethane foam with webbed metal frame. Seat cushion: polyurethane foam and polyester fibre. Seat height: 430 mm (applied load 355 mm, measured in accordance with EN 1335-1). Legs: die-cast aluminium, polished or powder-coated.
Upholstery: Alcove Sofas come in two different upholstery versions, soft 'lounge upholstery' for relaxed sitting and firmer 'work upholstery' for work-oriented sitting with various seat heights. Lounge upholstery = 485 mm (measured according to EN 1335-1 = 325 mm), work upholstery = 480 mm (measured according to EN 1335-1 = 385 mm).
Structural frame: tubular steel, chrome-plated or powder-coated (smooth); metal frame with upholstery webbing (lounge upholstery) or MDF base board (work upholstery).
Body: back and side panels with integrated MDF boards for structural support, panel sections connected with zip fasteners.
Upholstery/seat: polyurethane foam and polyester fibre. Alcove Sofas come in two different upholstery versions: soft 'Lounge' upholstery for relaxed sitting and firmer 'Work' upholstery for work-oriented sitting.
Seat heights: Lounge upholstery 485 mm (325 mm with applied load, measured in accordance with EN 1335-1); Work upholstery 480 mm (385 mm with applied load, measured in accordance with EN 1335-1)
Covers: removable.
Back cushions and cushion set: polyurethane chips and microfibre filling. The cushion set is sold separately.
Legs: tubular steel, chrome-plated or powder-coated (smooth).
Alcove Love Seat: incl. 1 back cushion.
Cushion set for Love Seat: 2 armrest cushions and 1 small back cushion.
Alcove two- and three-seater: incl. 2 back cushions.
Cushion set for two- and three-seaters: 2 armrest cushions and 2 small back cushions.
Seat cushions: polyurethane foam core and chamber cushion (filled with polyurethane foam lozenges, latex and a mix of goose feathers and down).
Lumbar cushion 60 x 30 x 6 cm: filled with a mix of feathers/down and ball fibre.
Back cushion 60 x 52 x 8 cm: filled with a mix of feathers/down and ball fibre.
Back cushion 70 x 60 x 8 cm: filled with a mix of feathers/down and ball fibre – combination with neck cushion recommended.
Back cushion 70 x 60 x 8 cm, latex filling: heavy filling of latex and feathers – cushion nestles against the angled backrest when used without neck cushion.
Back cushion 90 x 60 x 8 cm, latex filling: heavy filling of latex and feathers – cushion nestles against the angled backrest when used without neck cushion.
Armrest cushion 59 x 27 x 15 cm: filled with a mix of feathers/down and ball fibre, sand-weighted.
Neck cushion 70 x 17 x 15 cm: filled with a mix of feathers/down and ball fibre, sand-weighted.
Covers: removable.
Legs: die-cast aluminium, polished or powder-coated.
Accessory: Sofa Tray made of steel, covered with split leather.
Upholstery: Alcove Sofas come in two different upholstery versions, soft 'lounge upholstery' for relaxed sitting and firmer 'work upholstery' for work-oriented sitting with various seat heights. Lounge upholstery = 485 mm (measured according to EN 1335-1 = 325 mm), work upholstery = 480 mm (measured according to EN 1335-1 = 385 mm).
Structural frame: tubular steel, chrome-plated or powder-coated (smooth); metal frame with upholstery webbing (lounge upholstery) or MDF base board (work upholstery).
Body: back and side panels with integrated MDF boards for structural support, panel sections connected with zip fasteners.
Upholstery/seat: polyurethane foam and polyester fibre. Alcove Sofas come in two different upholstery versions: soft 'Lounge' upholstery for relaxed sitting and firmer 'Work' upholstery for work-oriented sitting.
Seat heights: Lounge upholstery 485 mm (325 mm with applied load, measured in accordance with EN 1335-1); Work upholstery 480 mm (385 mm with applied load, measured in accordance with EN 1335-1)
Covers: removable.
Back cushions and cushion set: polyurethane chips and microfibre filling. The cushion set is sold separately.
Legs: tubular steel, chrome-plated or powder-coated (smooth).
Alcove Love Seat: incl. 1 back cushion.
Cushion set for Love Seat: 2 armrest cushions and 1 small back cushion.
Alcove two- and three-seater: incl. 2 back cushions.
Cushion set for two- and three-seaters: 2 armrest cushions and 2 small back cushions.
Seat cushions: polyurethane foam core and chamber cushion (filled with polyurethane foam lozenges, latex and a mix of goose feathers and down).
Lumbar cushion 60 x 30 x 6 cm: filled with a mix of feathers/down and ball fibre.
Back cushion 60 x 52 x 8 cm: filled with a mix of feathers/down and ball fibre.
Back cushion 70 x 60 x 8 cm: filled with a mix of feathers/down and ball fibre – combination with neck cushion recommended.
Back cushion 70 x 60 x 8 cm, latex filling: heavy filling of latex and feathers – cushion nestles against the angled backrest when used without neck cushion.
Back cushion 90 x 60 x 8 cm, latex filling: heavy filling of latex and feathers – cushion nestles against the angled backrest when used without neck cushion.
Armrest cushion 59 x 27 x 15 cm: filled with a mix of feathers/down and ball fibre, sand-weighted.
Neck cushion 70 x 17 x 15 cm: filled with a mix of feathers/down and ball fibre, sand-weighted.
Covers: removable.
Legs: die-cast aluminium, polished or powder-coated.
Accessory: Sofa Tray made of steel, covered with split leather.
Pleasantly soft upholstery and side and back panels that can be adjusted to an outward angle of approximately 30° give the Mariposa Sofa (2014) by Edward Barber and Jay Osgerby
Seat cushions: polyurethane foam core and chamber cushion (filled with polyurethane foam lozenges, latex and a mix of goose feathers and down).
Lumbar cushion 60 x 30 x 6 cm: filled with a mix of feathers/down and ball fibre.
Back cushion 60 x 52 x 8 cm: filled with a mix of feathers/down and ball fibre.
Back cushion 70 x 60 x 8 cm: filled with a mix of feathers/down and ball fibre – combination with neck cushion recommended.
Back cushion 70 x 60 x 8 cm, latex filling: heavy filling of latex and feathers – cushion nestles against the angled backrest when used without neck cushion.
Back cushion 90 x 60 x 8 cm, latex filling: heavy filling of latex and feathers – cushion nestles against the angled backrest when used without neck cushion.
Armrest cushion 59 x 27 x 15 cm: filled with a mix of feathers/down and ball fibre, sand-weighted.
Neck cushion 70 x 17 x 15 cm: filled with a mix of feathers/down and ball fibre, sand-weighted.
Covers: removable.
Legs: die-cast aluminium, polished or powder-coated.
Accessory: Sofa Tray made of steel, covered with split leather.
Upholstery: Alcove Sofas come in two different upholstery versions, soft 'lounge upholstery' for relaxed sitting and firmer 'work upholstery' for work-oriented sitting with various seat heights. Lounge upholstery = 485 mm (measured according to EN 1335-1 = 325 mm), work upholstery = 480 mm (measured according to EN 1335-1 = 385 mm).
Structural frame: tubular steel, chrome-plated or powder-coated (smooth); metal frame with upholstery webbing (lounge upholstery) or MDF base board (work upholstery).
Body: back and side panels with integrated MDF boards for structural support, panel sections connected with zip fasteners.
Upholstery/seat: polyurethane foam and polyester fibre. Alcove Sofas come in two different upholstery versions: soft 'Lounge' upholstery for relaxed sitting and firmer 'Work' upholstery for work-oriented sitting.
Seat heights: Lounge upholstery 485 mm (325 mm with applied load, measured in accordance with EN 1335-1); Work upholstery 480 mm (385 mm with applied load, measured in accordance with EN 1335-1)
Covers: removable.
Back cushions and cushion set: polyurethane chips and microfibre filling. The cushion set is sold separately.
Legs: tubular steel, chrome-plated or powder-coated (smooth).
Alcove Love Seat: incl. 1 back cushion.
Cushion set for Love Seat: 2 armrest cushions and 1 small back cushion.
Alcove two- and three-seater: incl. 2 back cushions.
Cushion set for two- and three-seaters: 2 armrest cushions and 2 small back cushions.
Seat cushions: polyurethane foam core and chamber cushion (filled with polyurethane foam lozenges, latex and a mix of goose feathers and down).
Lumbar cushion 60 x 30 x 6 cm: filled with a mix of feathers/down and ball fibre.
Back cushion 60 x 52 x 8 cm: filled with a mix of feathers/down and ball fibre.
Back cushion 70 x 60 x 8 cm: filled with a mix of feathers/down and ball fibre – combination with neck cushion recommended.
Back cushion 70 x 60 x 8 cm, latex filling: heavy filling of latex and feathers – cushion nestles against the angled backrest when used without neck cushion.
Back cushion 90 x 60 x 8 cm, latex filling: heavy filling of latex and feathers – cushion nestles against the angled backrest when used without neck cushion.
Armrest cushion 59 x 27 x 15 cm: filled with a mix of feathers/down and ball fibre, sand-weighted.
Neck cushion 70 x 17 x 15 cm: filled with a mix of feathers/down and ball fibre, sand-weighted.
Covers: removable.
Legs: die-cast aluminium, polished or powder-coated.
Accessory: Sofa Tray made of steel, covered with split leather.
Seat: steel frame, wood construction with steel springs, polyurethane foam structure and visco cover.
Seat height: 380 mm (270 mm with applied load, measured in accordance with EN 1335-1).
Armrests and backrest: wood construction with polyurethane foam structure and chamber cushion overlay (filling made of polyurethane foam rods and polyester fibres).
Covers: removable.
Throw cushions: foam cube and ball fibre filling.
Neck cushion: polypropylene pellet filling.
Glides: plastic glides with levelling adjustment.
Ottoman structure: wood construction, steel springs and polyurethane foam structure with visco cover.
Seat: steel frame, wood construction with steel springs, polyurethane foam structure and visco cover.
Seat height: 380 mm (270 mm with applied load, measured in accordance with EN 1335-1).
Armrests and backrest: wood construction with polyurethane foam structure and chamber cushion overlay (filling made of polyurethane foam rods and polyester fibres).
Covers: removable.
Throw cushions: foam cube and ball fibre filling.
Neck cushion: polypropylene pellet filling.
Glides: plastic glides with levelling adjustment.
Ottoman structure: wood construction, steel springs and polyurethane foam structure with visco cover.
Seat cushions: polyurethane foam core and chamber cushion (filled with polyurethane foam lozenges, latex and a mix of goose feathers and down).
Lumbar cushion 60 x 30 x 6 cm: filled with a mix of feathers/down and ball fibre.
Back cushion 60 x 52 x 8 cm: filled with a mix of feathers/down and ball fibre.
Back cushion 70 x 60 x 8 cm: filled with a mix of feathers/down and ball fibre – combination with neck cushion recommended.
Back cushion 70 x 60 x 8 cm, latex filling: heavy filling of latex and feathers – cushion nestles against the angled backrest when used without neck cushion.
Back cushion 90 x 60 x 8 cm, latex filling: heavy filling of latex and feathers – cushion nestles against the angled backrest when used without neck cushion.
Armrest cushion 59 x 27 x 15 cm: filled with a mix of feathers/down and ball fibre, sand-weighted.
Neck cushion 70 x 17 x 15 cm: filled with a mix of feathers/down and ball fibre, sand-weighted.
Covers: removable.
Legs: die-cast aluminium, polished or powder-coated.
Accessory: Sofa Tray made of steel, covered with split leather.
Pleasantly soft upholstery and side and back panels that can be adjusted to an outward angle of approximately 30° give the Mariposa Sofa (2014) by Edward Barber and Jay Osgerby
Upholstery: Alcove Sofas come in two different upholstery versions, soft 'lounge upholstery' for relaxed sitting and firmer 'work upholstery' for work-oriented sitting with various seat heights. Lounge upholstery = 485 mm (measured according to EN 1335-1 = 325 mm), work upholstery = 480 mm (measured according to EN 1335-1 = 385 mm).
Structural frame: tubular steel, chrome-plated or powder-coated (smooth); metal frame with upholstery webbing (lounge upholstery) or MDF base board (work upholstery).
Body: back and side panels with integrated MDF boards for structural support, panel sections connected with zip fasteners.
Upholstery/seat: polyurethane foam and polyester fibre. Alcove Sofas come in two different upholstery versions: soft 'Lounge' upholstery for relaxed sitting and firmer 'Work' upholstery for work-oriented sitting.
Seat heights: Lounge upholstery 485 mm (325 mm with applied load, measured in accordance with EN 1335-1); Work upholstery 480 mm (385 mm with applied load, measured in accordance with EN 1335-1)
Covers: removable.
Back cushions and cushion set: polyurethane chips and microfibre filling. The cushion set is sold separately.
Legs: tubular steel, chrome-plated or powder-coated (smooth).
Alcove Love Seat: incl. 1 back cushion.
Cushion set for Love Seat: 2 armrest cushions and 1 small back cushion.
Alcove two- and three-seater: incl. 2 back cushions.
Cushion set for two- and three-seaters: 2 armrest cushions and 2 small back cushions.
Pleasantly soft upholstery and side and back panels that can be adjusted to an outward angle of approximately 30° give the Mariposa Sofa (2014) by Edward Barber and Jay Osgerby
Seat cushions: polyurethane foam core and chamber cushion (filled with polyurethane foam lozenges, latex and a mix of goose feathers and down).
Lumbar cushion 60 x 30 x 6 cm: filled with a mix of feathers/down and ball fibre.
Back cushion 60 x 52 x 8 cm: filled with a mix of feathers/down and ball fibre.
Back cushion 70 x 60 x 8 cm: filled with a mix of feathers/down and ball fibre – combination with neck cushion recommended.
Back cushion 70 x 60 x 8 cm, latex filling: heavy filling of latex and feathers – cushion nestles against the angled backrest when used without neck cushion.
Back cushion 90 x 60 x 8 cm, latex filling: heavy filling of latex and feathers – cushion nestles against the angled backrest when used without neck cushion.
Armrest cushion 59 x 27 x 15 cm: filled with a mix of feathers/down and ball fibre, sand-weighted.
Neck cushion 70 x 17 x 15 cm: filled with a mix of feathers/down and ball fibre, sand-weighted.
Covers: removable.
Legs: die-cast aluminium, polished or powder-coated.
Accessory: Sofa Tray made of steel, covered with split leather.
Upholstery: Alcove Sofas come in two different upholstery versions, soft 'lounge upholstery' for relaxed sitting and firmer 'work upholstery' for work-oriented sitting with various seat heights. Lounge upholstery = 485 mm (measured according to EN 1335-1 = 325 mm), work upholstery = 480 mm (measured according to EN 1335-1 = 385 mm).
Structural frame: tubular steel, chrome-plated or powder-coated (smooth); metal frame with upholstery webbing (lounge upholstery) or MDF base board (work upholstery).
Body: back and side panels with integrated MDF boards for structural support, panel sections connected with zip fasteners.
Upholstery/seat: polyurethane foam and polyester fibre. Alcove Sofas come in two different upholstery versions: soft 'Lounge' upholstery for relaxed sitting and firmer 'Work' upholstery for work-oriented sitting.
Seat heights: Lounge upholstery 485 mm (325 mm with applied load, measured in accordance with EN 1335-1); Work upholstery 480 mm (385 mm with applied load, measured in accordance with EN 1335-1)
Covers: removable.
Back cushions and cushion set: polyurethane chips and microfibre filling. The cushion set is sold separately.
Legs: tubular steel, chrome-plated or powder-coated (smooth).
Alcove Love Seat: incl. 1 back cushion.
Cushion set for Love Seat: 2 armrest cushions and 1 small back cushion.
Alcove two- and three-seater: incl. 2 back cushions.
Cushion set for two- and three-seaters: 2 armrest cushions and 2 small back cushions.
